STEP 5 Connect your phone to the network:
#
Phone Feature
Description
Installation
#
1
2
Phone Feature
Description
•
Using an Ethernet Connection—Insert the Ethernet cable into the slot
marked “WAN” (4). Insert the other end of the Ethernet cable into the
appropriate device on your network, such as a network switch. The
SPA922, SPA942, and SPA962 models provide a second Ethernet port (3).
You can connect a PC to this port to provide network access to the PC.
12
Volume button
Press + to increase the volume and - to lower the
volume of the handset, headset, speaker (when
the handset is off hook), or ringer volume (when the
handset is on hook).
Quick Start Guide
1
Handset
Pick up to answer or place calls.
When lit:
Message Waiting
Indicator
Red—You have a new voice mail message.
13
14
Headset button
Speaker button
Push to turn the headset on or off. When the
headset is on, the button glows green.
•
Using a Wireless Connection—If you have a SPA9XX phone, you can use a
wireless connection if you have the Cisco WBP54G Wireless-G Bridge. See
WPB54G documentation for more information.
Flashing Red—You have an incoming call or the
phone’s firmware is being updated.
Push to turn the speaker on or off. When the
speaker is on, the button glows green.
3
4
LCD Screen
Line keys
Typically displays date and time, phone station
name, line extensions, and softkey options.
Softkey Buttons
(not available on SPA92x) Indicates phone line
status. Typically, when lit:
1
The softkey buttons on your phone display may vary depending on your phone
model and the phone system setup. Press the right navigation button or the
More button to view additional softkey buttons. Below is a partial listing of
softkey buttons that may be available on your phone.
Green: Line is idle.
Phone Lines and Buttons
2
3
2
Red (steady): Line is active or in use.
Red (blinking): Line is on hold.
4
5
Yellow: Line is unregistered (cannot be used).
Orange: The network connection cannot be found.
1
2
3
4
Button
Function
BXfer
Performs a blind call transfer (transferring a call without
speaking to the party to whom you are transferring the call.)
5
6
7
8
Softkey buttons
Navigation button
Keypad
Press a softkey button to perform the action
shown on the label on the LCD screen above.
Call Rtn/lcr
Change
Returns the last missed call by dialing the number that called
you.
Press an arrow o scroll left, right, up, or down
through items shown on the LCD screen.
Cisco Small Business SPA IP Phone
Opens a menu so that you can change the properties for an
item (for example, change a ring tone).
!
CAUTION
Do not insert a telephone line cord into the port marked
“AUX” (1).
5
6
Use to dial phone numbers, enter letters, and
choose menu items.
Models SPA921, SPA922, SPA941, SPA942, and
SPA962
Clear
Deletes an entire text/number field.
Clears Do Not Disturb.
7
Messages button
Press to access voice mail (must be set up by your
phone administrator).
Clr DND/-dnd
Conf
8
9
STEP 1 Turn the phone over to expose the ports on the back of the unit.
Initiates a conference call.
10
11
9
Hold button
Press to place a call on hold.
Package Contents
DelChar/delChr Deletes the last number or letter.
STEP 2 Insert one end of the phone cord into slot marked with a phone symbol
(5). Insert the other end into the jack at the bottom of the handset (not
shown).
10
Setup button
Press to access a menu to configure features and
preferences (such as your directory and speed
dials), access your call history, and set up functions
(such as call forwarding).
•
•
•
•
•
•
IP telephone
Delete
Deletes an entire item (for example, a number from the Call
12
History list).
Power Adapter (SPA921 and SPA941 only)
Desk Stand
STEP 3 (Optional) Connect the desk stand by lining up the tabs on the desk
stand with the slots on the back of the phone. Slide the bottom tabs
into the slots and lightly press down on the top of the desk stand. It
should easily slide into the top slots. Do not force.
Dial
Dials a number.
14
13
Directory/dir
Provides access to your personal and corporate phone
directory.
11
Mute button
Press to mute or unmute the phone. When phone is
muted, the button glows red. A flashing mute
button indicates the network connection cannot be
found.
RJ-45 Ethernet Cable
Setup CD-ROM
Refer to the following table for identification of your IP phone’s buttons.
DND/DnD
Edit
Do Not Disturb; prevents incoming calls from ringing your
phone.
STEP 4 If you are using an external power source, plug one end of the power
cord into the building’s power source and insert the other end of the
power cord into the phone base (2).
Quick Start Guide
Opens an item so that you can edit numbers or letters, or
enable or disable a feature.
EditDial
Edits a number before dialing.
|